BOB KB110-SSWM | RUBBERMAID Horizontal Wall Mounted Baby Changing Station
Bobrick Horizontal Wall Mounted Baby Changing Station:
- Shall have 18-gauge satin stainless steel exterior finish with high- density polyethylene with Microban antimicrobial interior.
- Design of unit shall be surface- mounted.
- Unit shall be equipped with a pneumatic cylinder for controlled opening and closing of bed.
- Bed shall be secured to back plate with a concealed, full-length steel- on-steel hinge.
- Unit shall have Microban antimicrobial embedded into plastic material.
- No hinge structure shall be exposed on interior or exterior surfaces.
- Unit shall have 11 -gauge steel mounting plates with mounting hardware included.
- Unit shall conform to ANSI S117.1 accessible and usable buildings and facilities, ASTM F 2285-04 standard consumer safety performance specification for diaper changing tables for commercial use, ANSI Z535.4 product safety signs and labels, ASTM G21 antifungal and ASTM G22 antibacterial standards or local code if more stringent Installation requirements are applicable for barrier free accessibility.
- Unit shall comply with ADA regulations when properly installed.
- Bed shall have smooth concave changing area with a nylon safety strap and two hooks for bags or purses.
- Unit shall have a built-in liner dispenser for use with 3-ply chemical free biodegradable sanitary liners, universal instruction graphics and safety messages in 6 languages.
- Manufacturer's service and parts manual shall be provided to the building owner/manager upon completion of project.
- Unit shall be backed by manufacturer's 5-year limited warranty on Materials and workmanship and include a provision for replacement caused by vandalism.
- Unit 35 1?4" W, 20" H
- Unit shall be manufactured in the USA Depth (closed) 4" (100mm). Extension (open) 15-3/16" (385mm).