ASI 0469-BL | ASI Paper Towel Dispenser and Waste Receptacle
American Specialty Paper Towel Dispenser and Waste Receptacle: shall hold and dispense 800 standard multi-fold or 600 standard C-fold paper towels and shall have a waste capacity of 18 gal (68 litres).
- Towel dispenser, door, frame, waste container and cabinet shall be fabricated of alloy 18-8 stainless steel, type 304, 22 gauge; all exposed surfaces shall have No 4 satin finish.
- Towel dispensing slot shall have a fully hemmed-in rolled edge for snag-free dispensing and user safety.
- Door shall be fabricated in double-pan construction with fiberboard filler and shall be attached to cabinet at side with a full length 3/16" (5mm) dia. stainless steel multi-staked piano hinge and be held closed with a tumbler lock keyed alike to other ASI washroom equipment.
- Waste container shall have hemmed edges for safety and shall be retained by a tumbler lock keyed alike.
- Face trim shall be 1" (25mm) wide formed from one piece with no miters, welding or open seams and have 1/4" (6mm) square return to wall.
- Structural assembly of all components shall be of welded construction.

Installation:
Unit is mounted in wall recess using four (4) No 10 self tapping screws (by others) through concealed mounting holes provided.
Note that top of rough wall opening is 3/4" (19mm) below top of unit.

Operation:
Towels are self-feeding until supply is depleted. properly. Waste container is emptied manually. . Locked compartment prevents unauthorized access.